| Versatility
The ULTRA-DRILL uses standard HSS flat-beaded
bits or Cobalt tapered-shank twist drill bits. Vertical hole
cents can be determined by using the universal height adjustment
or rail specific position blocks.
Drill Through Joint Bars
One of the few rail drills on the market
that has enough shaft length to drill through joint bars.
Quick Set-up
The ULTRA-DRILL is capable of drilling
from 80-lb (36 kg) to 175-lb (79 kg) rail (including crane
rail) with optional attachments. The cam-locking clamp arm
allows for quick and easy attachment to the rail.
Automatic Feed
The continuous automatic feed insures
a smooth drilling action that produces a consistent hole through
any rail and long bit life. The drill also has a high-ration
hand crank feed for quick retract and set-up.
Safety
Triangulated roll bar protects the engine
and provides grab handles for easy safe lifting.
Model 910062
• Briggs & Stratton 6-hp, 4-stroke gasoline engine
with integral throttle and choke control.
• Spindle and feed system utilizes all gear configuration.
Spur type primary reduction set and worm-gear type spindle
drive are oil-bathed in lightweight, alloy case.
• Bit fee uses planetary reduction gear set with Acme
thread feed screw utilizing over-torque protection. Feed is
activated with a lever-type engagement clutch.
• Spindle speed is set at 100 rpm; feed is .005 inches
per revolution.
• Dimensions: L-38” (15 cm) W-24” (9.5 cm)
H-20” (8 cm)
Weight: 99 lbs (45 kg)
|
